Learn step by step how to prepare perfectly smoked Pork Spare Ribs on a Traeger pellet grill!
We cover how to prepare, season, cook, and sauce your pork spare ribs using the beloved 3-2-1 Method and why the Traeger pellet grill makes it so easy to cook these ribs.

The 3-2-1 method of smoking pork spare ribs on a Traeger, or any smoker for that matter, refers to the number of HOURS you spend on each step of the rib cooking process.
In its most basic form, the 3-2-1 method of smoking pork spare ribs goes as follows:
- 3 Hours smoking unwrapped
- 2 Hours cooking wrapped in foil
- 1 MORE Hour cooking unwrapped.
We will dive into each of these steps in much greater detail as we proceed below.
Now, as with all things in BBQ, and cooking in general for that matter, there is room for nuance, interpretation, and modification depending on a wide variety of factors including but not limited to:
- The cooking temperature you set on your Traeger pellet grill.
- The outdoor temperature and humidity that day
- What texture you personally prefer your pork spare ribs (completely falling off the bone vs. firm and still having some bite to them)
So what is important is not to dogmatically stick to any certain amount of cooking time in each step, but to understand the basic framework and sequencing and ALSO understand how to adjust each step based on the variables listed above.
Depending on your personal preference, you might do a 2-2-1, or a 3-1-½, or even a 4-1-1.
If one can understand how to adjust the cooking times in each step and how doing so will affect the finished product, THAT particular day, with THOSE particular ribs, for THESE particular guests, well...thats what will make them a TRUE pitmaster that can roll into any given situation and be successful every time.
Jump to:
- Pork Spare Ribs vs. St. Louis Cut Ribs
- How Many Racks of Pork Spare Ribs Should I Buy?
- Trim the Pork Spare Ribs
- Remove the Membrane
- Apply the Rub
- Let the Rub Rest
- Choosing Rubs and Sauces
- Choosing Wood Pellets
- Start and Set Up the Traeger
- Smoking Temperature
- The 3 2 1 Method Explained
- The First 3 Hours - Smoke
- The Next 2 Hours - Wrap
- The Final Hour - Firm and Sauce
- Carving and Serving
- 📖 Recipe
Pork Spare Ribs vs. St. Louis Cut Ribs
If the baby back portion of the ribs take up the half of the rib closer to the spine, or loin muscle, of the hog, then the spare ribs take up the side closer to the sternum or chest of the animal.
Now, animals that walk on all fours use their chest muscles waaaay more than their back muscles, resulting in tougher meat.
This is why pork and beef tenderloin, which come from the backs of their respective animals, are so much more prized than say brisket or pork shoulder, which come from the hardworking front of the animals.
And these cuts of meat require much longer low and slow cooking to break down vs. a tender pork loin or filet mignon, See a pattern here?
So we can think of pork spare ribs in much the same way.
The spare ribs are a darker, tougher cut of the ribs that while requiring a little more care and effort to cook, like all BBQ can be amazing and delicious when done right.
St. Louis Style or St. Louis Cut
If you see a package of St. Louis Style or St. Louis Cut Ribs at the store, don't worry, this is NOT a third type of ribs, and has nothing to do with where they come from, but rather just a cleaned up rack of pork spare ribs.
A full untrimmed rack of pork spare ribs include the parts of the ribs that start to change from bone to cartilage as they attach to the sternum in the center of the hog's chest.
However, many folks prefer just to have the more traditional bones and a nicely trimmed rectangular rack of ribs sitting in front of them without the odd bendy pieces of cartilage to deal with.
Hence, this is what a St. Louis Cut of pork spare ribs is.
If you've never cooked ribs, or only ever cooked baby backs, and want to try pork spare ribs on your Traeger, we'd recommend starting with a rack of St. Louis Style pork spare ribs first.
Thankfully, the 3-2-1 method of cooking ribs really holds up well in its original form when cooking a rack of pork spare ribs (or St. Louis cut ribs), so you shouldn't need to modify too much form the original technique on your Traeger.
Spare Ribs Stage 1
The pork spare ribs, being a darker and tougher meat, can handle a little more smoke than leaner baby backs. So go ahead and smoke here for the full 3 hours.
If you are doing a full untrimmed rack, you could even push it to 3.5 or 4 hours, especially on a cold or dry day or if you are cooking below 225*F.
Spare Ribs Stage 2
Like with Stage 1, your pork spare ribs will likely need a little more time wrapped than their baby back counterparts, possibly even the full 2 hours.
But make sure to still check early and often starting around the 1 hour mark, maybe every 15 minutes until the meat looks how you want it.
How Many Racks of Pork Spare Ribs Should I Buy?
If you are feeding a crowd, you may be trying to decide how many slabs of pork spare ribs you need to cook on your Traeger to feed everyone.
Most hungry adults can eat about a half a slab which is about 6 ribs.
Take into consideration if you are also serving other proteins or a lot of heavy side dishes in which case folks may only take 3-4 ribs.
One great way to fit a lot of pork spare ribs at once on your Traeger is to use a Rib Rack.
You can stand 5 racks upright and fit around 10 slabs on a typical Traeger pellet grill so you can feed a very large crowd!
- Cook more ribs and feed the crowd - perfect for parties, our mountain grillers rib racks for grilling hold 5 racks of ribs upright, doubling your grilling capacity, no-one is waiting to sink their teeth into your perfectly juicy, mouth-watering baby back ribs at your next backyard bbq
Ok, now that we have a basic framework in our heads of HOW to cook pork spare ribs on our Traeger pellet grill, it's time to start prepping the spare ribs.
Trim the Pork Spare Ribs
The best way to prepare pork spare ribs for smoking on the Traeger is to first cut them into a St. Louis Cut.
Don't throw away the pieces you take off!
These rib tips can be smoked right alongside the spare ribs and are delicious.
Start by cutting off the thin pointy end of the rack of spare ribs.
Then find the long curved edge of the rack and cut this so that the rack is now more rectangular.
Remove the Membrane
Once you have removed your slabs of pork spare ribs from the packaging, you will need to remove the membrane on the back of each rack.
This membrane not only keeps the seasonings from penetrating the meat, but makes the ribs harder to carve and bite into or fall off the bone, and is well...just generally unappetizing to your guests.
Luckily it's not hard to remove with a couple tricks used by BBQ professionals all over the world every day.
First, slide a good sharp knife, preferably a good boning knife like our favorite one from Imarku to get the membrane separated from one of the corners.
- Made of high-carbon German stainless steel to provide maximum sharpness, edge retention, and corrosion resistance. Properly balanced to allow precise close-to-bone slicing
- Lifetime guarantee
Next, once you can grab a little bit of the membrane, use a paper towel to grip it tight and pull down to the other corner.
Sometimes it comes off in one big piece, other times you will need to go back and remove some pieces that didn't come off, but using a paper towel is the best way to get a hold of this slippery membrane.
Once this membrane is removed, you are ready to season your ribs.
Apply the Rub
Mustard? But of Course!
Believe it or not, one of the best ways to bind your rub to your meat is with plain old yellow mustard.
Trust us.
And trust the thousands of BBQ competitors who have used it over the years. You won't taste any mustard flavor once the cook is over and it holds the rub in place like a champ.
Simply spread a thin layer of yellow mustard all over the front and back of your pork spare ribs and then sprinkle your rub on after that.
If you are separating out your salt from your rub, add the salt first, then the rub on top of that so that the salt is closer to the surface of the meat.
If you truly have an aversion to using any kind of mustard, you can also substitute a thin layer of any kind of cooking oil you wish.
But make sure to use something as this will help the rub adhere to the meat and not fall off as you are handling it.
Let the Rub Rest
Once you've applied your rub to the pork spare ribs, don't throw them right on the Traeger just yet!
Give the rub about 20-30 minutes to draw some moisture out of the spare ribs and create a nice paste, and then bark on the outside of the meat during the first stage of your 3-2-1 cook.
This pulled out moisture will absorb a lot of your smoke flavor, and eventually that moisture will make its way BACK into the spare ribs as they rise in temperature, pulling your delicious rub and absorbed smoke with it into the meat and also helping to create that coveted pink smoke ring.
Choosing Rubs and Sauces
Asking "What's the best rub for pork ribs?" is kind of like asking "What is the best car on the market?" or "Who was the best baseball player?"
You are bound to start some opinionated discussions.
But like all things BBQ, it comes down to your personal preferences, dietary restrictions, the crowd you are cooking for, and really, just what you happen to be in the mood for that day.
If you don't want a lot of salt, make your own rub and cut back on the salt. If you don't want a lot of sugar, we've got a great suggestion below for that too.
What we CAN say is we've tried A LOT of rubs and sauces over the years, and these are our favorites below.
Blues Hog
Blues Hog products are widely used on the competition circuit, and for good reason.
Their original rub is very sugar and paprika forward, without a lot of spice, so if you are going for a sweeter flavor for your pork spare ribs, this is the way to go.
Three Little Pigs
Three Little Pigs is one of our personal favorites, and their Kansas City Championship Rub will give you a bit more garlic, onion, and spice than Blues Hog will.
You can always mix it in with a more balanced rub like Blues Hog if you just want to add a little of those flavors.
Bad Byron's Butt Rub
If you want to use a quality rub without ANY sugar, we are big fans of Bad Byron's Butt Rub Seasoning.
Although we typically use it on cuts of beef and steaks where we are going for a more savory flavor, there is no reason you can't apply it to your Traeger smoked pork spare ribs because it is heavy on flavor, and has <strong>no sugar.
- Try Bad Byron Butt Rub on beef, fish, vegetables, potatoes, and much more!
Homemade Pork Spare Rib Rubs
Meathead's Memphis Dust
We are big fans of Meathead Goldwyn over at amazingribs.com, and are also in love with his Memphis Dust Rub Recipe.
It's so good, you don't even need sauce.
Now, Meathead doesn't put salt in any of his rub recipes but rather salts his meat separately first.
So make sure to take that into consideration if you choose to prepare this classic rub for your ribs.
Homemade "In a Pinch" Rub
Sometimes, you forgot you ran out of your favorite rub, or don't have all the ingredients on hand to make a complex one from scratch.
If you just want to get a good classic rub on your Traeger pork spare ribs before throwing them on the pellet grill, then we've got you covered with this simple rib rub recipe with seasonings most people have on hand in the pantry:
- ½ Cup Dark Brown Sugar
- ¼ Cup Paprika
- 1 tablespoon Coarse Ground Black Pepper
- 1 tablespoon Kosher Salt (Or ½ tablespoon table salt, go easy, you can always add more salt later)
- 1 tablespoon Chili Powder
- ½ tablespoon Granulated Garlic or Garlic Powder (adjust to taste)
- ½ tablespoon Onion Powder (adjust to taste)
- 1 teaspoon Cayenne Pepper (optional)
Mix thoroughly, (using a re-usable plastic shaker works best), and then sprinkle directly on your ribs after applying some mustard to bind as described above.
Our Favorite Pork Spare Rib Sauces
Blues Hog again wins the day here with their amazing lineup of sauces. While their rubs are great, their sauces are WORLD CLASS.
Their Original BBQ Sauce is VERY thick, VERY sweet, and incredibly heavy on flavor, so a little goes a LONG way.
In fact, we actually like to cut it with their Tennessee Red Sauce, which is a thinner, more vinegar based sauce, that is our hands down favorite sauce to use on our pulled pork as described here.
You can pick up both and mix them like we do, or mix Blues Hog Original in with one of your other favorite (we'd suggest more savory sauces to balance the sugar, like this one from Aaron Franklin.)
Kosmos also makes a great lineup of BBQ sauces that work great on Traeger pork spare ribs, especially if you want to try some more adventurous flavors such as their Peach Habanero or Honey Jalapeno.
Choosing Wood Pellets
You have a lot of options when it comes to choosing the right wood pellets to smoke your pork spare ribs on a Traeger pellet grill.
Mesquite and hickory will give a very aggressive smoke flavor, usually a little too much if used solely on their own rather than mixed with a milder fruitwood, especially with pork ribs.
Pecan, apple, beech, alder, and cherry pellets all give great results on pork spare ribs when cooked on a Traeger.
For a very straightforward flavor on baby backs, we are also big fans of Bear Mountain Red and White Smoky Oak Pellets
- SMOOTH OAK FLAVOR: Oak BBQ pellets add a smooth, smoky flavor to your favorite red meat, fish, lamb, pork, or vegetable dish
- ALL-NATURAL HARDWOODS: Made from 100% all-natural hardwoods with no flavorings, fillers, or additives
For the best results, store your unused pellets in a sealed room temperature container like this 20 lb pellet container rather than in the Traeger hopper outside.
Traeger pellets do not last forever, but will definitely last a LOT longer if stored indoors in a quality airtight container.
- Store up to 20 pounds of hardwood pellets in the heavy-duty plastic pellet bucket.
- Weatherproof, airtight lid protects pellets from the elements, keeping them fresh and dry
- Wire-mesh filter separates wood dust from the pellets for a clean burn
- Heavy-duty plastic scoop to easily transfer pellets
Start and Set Up the Traeger
Now that the pork spare ribs have been prepped and seasoned and the rub has rested and permeated the meat a bit, all that's left to do is cook them!
With a Traeger, this is the easy part!
There is a specific start up process for the Traeger brand pellet grills you can read all about in depth here if you aren't sure how to fire it up the first time.
Read More: What's the difference between the Smoke setting and the 180 Degree setting on a Traeger?
Like we described previously, just add your chosen pellets to the hopper, plug in and start the Traeger grill up.
Let the Traeger go through its start up process and once it has come up to temperature and stopped producing the thick white "start- up" smoke, put the pork spare ribs on the grill.
Pro Tip: Line your slabs up with the thicker ends to the right, which is normally the hotter side of the Traeger.
Smoking Temperature
We recommend initially setting up the Traeger to cook at 250°F.
This seems to be the sweet spot where its low enough that the outside doesn't overcook but also high enough that the spare ribs don't cook for so long that they dry out.
If you choose to cook at a higher or lower temperature, make sure to adjust your times during each stage of The 3 2 1 Method outlined below.
The 3 2 1 Method Explained
Now, let's get into the nuts and bolts of using the 3 2 1 Method to smoke ribs on a Traeger pellet grill.
Just to review, this refers to the following blocks of time:
- The First 3 Hours: Smoking the spare ribs
- The Next 2 Hours: Wrapping the spare ribs in foil so that they steam and get tender and more "Fall off the Bone" style.
- The Last 1 Hour: Taking them out of the foil and putting them back on the Traeger to firm up and finally saucing them during the last 30 minutes.
Again, this is just a framework, and a way of simplifying the process. Understand that in BBQ there are no absolutes.
You can keep your Traeger pegged at 250°F throughout this whole process.
The First 3 Hours - Smoke
3 hours is a suggestion. You may only need to smoke the spareribs for 2 hours before wrapping if they are small, or if your Traeger tends to run hot, or if it's especially hot and humid out that day.
So how DO you know how long is enough during Stage 1?
The idea is to get a nice smoke flavor on the pork spare ribs and get them to turn a nice dark red and amber color without completely drying them out.
You will watch them go from looking raw, to sweating and having a nice wet paste, to the paste turning more into a firm bark that you can no longer move gently around the surface of the rib with your finger.
One way to keep them from drying out is to spritz them with some sort or flavorful juice, cola, or beer during this part of the cook.
Many BBQ pros like to use a mixture of 75% apple juice and 25% apple cider vinegar. Some use cherry cola and swear by the dark color and sugar caramelizing on the surface.
Once you have a nice color on the spare ribs after about 2 hours, keep a close eye on them if you cook any longer.
You want to avoid burnt looking edges and big splits across the top of the meat.
You can rotate them a bit during this time if one side of your Traeger is a lot hotter than the other.
If you are using rib racks, turn them over about half way through the cook to make sure they cook evenly.
The Next 2 Hours - Wrap
Again, 2 hours is a suggestion, and you may find you don't need to wrap a full 2 hours.
The longer you wrap, the more the pork spare ribs will steam and become "fall off the bone" tender.
But overdo it and you'll end up with a foil bag of bare bones and loose shredded pork!
So wrap tightly for 45 minutes to an hour and then check every 15 minutes until you see the meat pulling away from the ends of the bones.
When you see the meat pulling away from the ends of the bones as in the picture above, this is usually a good indicator they are ready to come out of the foil.
Have fun with your ingredients inside the foil.
Many BBQ competitors use a combination Parkay squeeze butter, brown sugar, and honey to make a sweet glazy bath for their ribs in the foil.
Pro Tip: For more moist, fall off the bone meat, place the pork spare ribs upside down into your foil wrap of ingredients, wrap, and then place on the grill upside down this way. Then turn them back over right side up to firm up later when you remove them from the foil in Stage 3.
The Final Hour - Firm and Sauce
It may take a few cooks for you to learn exactly how long to wrap your pork spare ribs on the Traeger based on how you like them.
Once you are ready to remove the spare ribs from the foil be careful, the steam and liquid will be EXTREMELY HOT!
We recommend a good pair of insulated meat handling gloves to easily pick up the hot rack of ribs rather than trying to awkwardly use forks and tongs.
- 1, SAFETY FOR BOTH DRY& WET USE▶ Premium flame resistant neoprene coated outside protects your hands from burning coal, hot grill, sparks,boiling water and other heat sources. 14-inch length provides more protection above your wrist
- 3, OIL RESISTANT& EASY CLEANING▶ The chemical stable and liquid & steam resistant material makes it handy for grabbing meat and spraying sauce.Simply wash them in the sink with your gloves still on with hot water and soap when finishing your job.
For one, you don't want to burn yourself, but you also don't want to end up with a hot slippery slab of ribs on the ground.
Place the pork spare ribs back on the Traeger, unwrapped and right side up, (or back in the rib rack), and give them about 30 minutes to firm up a little before you start putting on any sauce.
Then baste your favorite sauce (or combo of sauces like Blues Hog Original and Tennessee Red mentioned above) on for the last 30 minutes.
This will give the sauce some time to caramelize on the spare ribs a bit and stick to the meat.
You are welcome to crank the heat on your Traeger here for the last 30 minutes up to 275-300°F if you want to really caramelize your sauce, but just watch the ribs carefully and make sure not to burn the sugars in you sauce.
Carving and Serving
When it comes to slicing up and serving your Traeger smoked pork spare ribs, it helps to know where exactly each of the bones start and end.
If you bought a St. Louis cut rack of spare ribs, it should be fairly straightforward since the butcher already cut away the irregular ends known as the ribs tips.
The best way is to hold them up on their longer straighter edge on a cutting board so you are looking at the back of the rack to better see the bones and where to cut.
A good meat slicing knife makes all the difference and will keep the ribs from falling apart as you slice.
We particularly like this meat slicing knife from Mairico.
- IMPECCABLE PERFORMANCE: The long, ultra sharp blade is engineered to deliver highly precise cuts with minimal effort.
- PROFESSIONAL DESIGN, SUPERB QUALITY: Most desirable length by professionals. Sharp blade with premium stainless steel engineered to excel on all cuts of meats, including big roasts. It is also designed to last.
We don't recommended cutting every rib up individually before serving or they are more likely to dry out.
Depending how many guest you are serving, you can either give each person their own ⅓ to ½ slab, or put them on a platter cut up in 2-3 rib sections for people to serve themselves with tongs.
One end of the rack of pork spare ribs, closer to the rib tips, the ribs will have more cartilage than solid rib, and be "bendier". This is normal.
The other end of the rack the bones will be more solid similar to baby back ribs. Depending what you are your guests prefer you can dictate which end you start cutting from primarily.
Serve some extra sauce on the side for those who want it, and enjoy
📖 Recipe
Traeger Smoked Pork Spare Ribs
Equipment
- Traeger Pellet Grill
- Wood Pellets (preferably a fruitwood or oak)
- Empty Spray Bottle
- Rib Rack optional
- Aluminum Foil
- Heat Resistant BBQ Gloves
- Basting brush
- Meat Slicing Knife
Ingredients
- 2 Full Racks of Untrimmed Pork Spare Ribs
- 2 tablespoon Yellow Mustard
- 1 cup Your Favorite BBQ Sauce such as Blues Hog
Mad Backyard "In a Pinch" Rib Rub
- 1 cup Dark Brown Sugar
- ½ cup Paprika
- 2 tablespoon Course Ground Black Pepper
- 2 tablespoon Kosher Salt or ½ tablespoon Table Salt
- 2 tablespoon Chili Powder
- 1 tablespoon Granulated Garlic
- 1 tablespoon Onion Powder
- 2 teaspoon Cayenne Powder optional for heat
Spritz
- ½ cup Apple Juice
- ¼ cup Apple Cider Vinegar
Wrapping Seasonings
- 1 Cup Dark Brown Sugar optional
- 2 drizzles Honey optional
- 2 drizzles Parkay Squeeze butter, or (3) 1 tablespoon tabs stick butter optional
- 2 drizzles Tiger Sauce optional for heat
Instructions
Prepare the Pork Spare Ribs and the Spritz
- Trim away the small pointy end of the untrimmed rack of pork spare ribs.
- Then, trim away the curved long end so that you have a nice rectangular rack of ribs in front of you.
- Remove the membrane from the back each rack of spare ribs using a knife to get it started in one corner, then grabbing on with a paper towel and pulling towards the opposite corner.2 Full Racks of Untrimmed Pork Spare Ribs
- Apply a thin layer of yellow mustard to the front and backs of each rack of spare ribs and rub to coat entirely.2 tablespoon Yellow Mustard
- Use your favorite BBQ rub or mix the In a Pinch Rub ingredients listed above together in a bowl or shaker.1 cup Dark Brown Sugar, ½ cup Paprika, 2 tablespoon Course Ground Black Pepper, 2 tablespoon Kosher Salt, 2 tablespoon Chili Powder, 1 tablespoon Granulated Garlic, 1 tablespoon Onion Powder, 2 teaspoon Cayenne Powder
- Apply a generous amount of rub to the fronts and backs of each slab of pork spare ribs. Its OK to leave some rub leftover to apply more throughout the cook if needed.
- Let the rub set on the ribs at room temperature for about 20-30 minutes before putting them on the Traeger. You can also optionally then wrap the spare ribs in plastic wrap and place in the refrigerator for a longer period if needed or if you want to prepare ahead the night before.
- While the rub is setting, mix the apple juice and apple cider vinegar together well in a spray bottle.½ cup Apple Juice, ¼ cup Apple Cider Vinegar
Stage 1 - Smoke the Ribs
- Start up the Traeger pellet grill, add your chosen pellets to the hopper, and set the temperature to 250°F.
- Once the Traeger is making smoke and up to 250°F, place the pork spare ribs on the grill with the thickest sides to the right (the hotter end of the grill). Use a rib rack if preparing more than 4 racks of ribs at once.
- Close the lid and let the spare ribs cook for about 90 minutes. You can spritz gently as necessary to keep the meat moist if it begins to look dry.
- After 90 minutes rotate the spare ribs if one side appears darker than the other and begin checking them about every 15-20 minutes.
- This stage will take roughly 2.5-3 hours. While they are continuing to smoke on the Traeger, you can prepare your foil and wrapping ingredients.
Stage 2 - Wrap the Ribs
- Lay out 2 long pieces of heavy duty aluminum foil on top of each other on the counter, long enough to double wrap one rack of spare ribs front and back with the two pieces. We will repeat with the other rack.
- Spread ½ cup of brown sugar on each set of aluminum foil, then drizzle some honey, Parkay squeeze butter, and Tiger Sauce on each. (this is optional)1 Cup Dark Brown Sugar, 2 drizzles Honey, 2 drizzles Parkay Squeeze butter, or (3) 1 tablespoon tabs stick butter, 2 drizzles Tiger Sauce
- Once the ribs are a nice dark amber color and especially if you begin to see any very dark burning on the bones or ends, usually around the 2.5 hour mark, remove the spare ribs from the grill using tongs or heat resistant gloves.
- Place the spare ribs face down into each pile of ingredients in the aluminum foil and add more of the ingredients to the back (top) of the ribs if you wish.
- If you would rather not use the wrapping ingredients listed above, place the ribs in the foil face up and add a small amount of apple juice, soda, or beer to the aluminum foil to add some moisture.
- Wrap the ribs tightly in the double layer of aluminum foil and place back on the Traeger, FACE DOWN, and continue to cook at 250°F.
Stage 3- Firm and Sauce the Ribs
- Begin checking the spare ribs after about 45-60 minutes and every 15 minutes after that. Once you see the meat pulling away from the ends of bones and tenderizing, you can take them off the Traeger and out of the foil. This may only take less then 2 hours so watch closely. The longer you leave them in the foil the more the meat will start to fall of the bone.
- Carefully remove the pork spare ribs from the foil and save the juices from the foil to add to your sauce later. Place the spare ribs back on the Traeger, FACE UP now, and cook for about 30 more minutes at 250°F before saucing.
- While the ribs are cooking, prepare your sauce by mixing your favorite sauce(s) together with some of the juices retained from the foil. Mix in a cup or bowl and set aside.1 cup Your Favorite BBQ Sauce such as Blues Hog
- After the spare ribs have been back on the Traeger unwrapped for about 30 minutes and firmed back up a little, gently brush the sauce on with a basting brush.
- Close the lid and continue cooking for another 30 minutes to let the sauce thicken and set on the spare ribs.
Slicing and Serving the Pork Spare Ribs
- Remove the spare ribs from the Traeger and let them rest on a cutting board for about 15 minutes.
- Turn the ribs upright on their long straighter edge so that you can more easily see the ribs running along the bottom up and down from the backside.
- Using a good meat slicing knife cut from top to bottom between the bones in the center of the racks to serve a third of a rack to each person. Or you can cut them into single or 2-3 rib portions on a platter to a larger crowd.
- Include some sauce on the side for guests to add extra if they desire and enjoy!
Ben - Rochester, NY says
Thank you for breaking down the 321 method, very helpful. We found 60 minutes of wrapping was more than enough otherwise the meat would have really been falling off the bone!